FIRMWARE UPDATE PROCEDURE
1. Updating via USB
The latest firmware can be downloaded to a USB memory for updates.
1.1. Connecting to the USB Memory
(1) Preparation
• Use a memory that supports USB2.0.
• USB format : Prepare a USB memory formatted in FAT16 or FAT32.
• Do not run the USB memory through a hub.
• Do not connect a computer to the USB port of this unit using a USB cable.
• Do not use an extension cable when connecting the USB unit.
• If a USB memory device cannot be updated, replace it with a different USB memory device and perform the update
again.
1.2. Unzipping the Downloaded File
Unzip the downloaded file on your computer.
AVR-XXXXXXX
USB_AVR-XXXXXXX_XXXXXXXXXXXX-XXXX.zip
The "
firmwares
" folder is created upon unzipping the file.
Copy that folder to USB flash drive.
The "
firmwares
" folder must be in the root directly of the USB flash drive (memory).
copy to USB flash drive
60
Содержание AVR-S910W
Страница 8: ...Personal notes 8...
Страница 107: ...POWER DIAGRAM S2 8V 8V MAIN TRANS S1 AMP B MAIN PWR ON VCC DIAGRAM AC CORD 107...
Страница 159: ...2 FL DISPLAY FLD 018BT021GINK FRONT FL4400 PIN CONNECTION GRID ASSIGNMENT q T7 159...
Страница 160: ...ANODE CONNECTION 160...