When the results of check item (5) are "the communication results are OK"
Checking operation between the HDMI (Rx/Tx) device and the player
b
In order to check, connect the player to the HDMI terminal and configure the player as AVR source.
Check the sound output while turning on the player.
Checking the +5V/DDC status register (HDMI Rx/Tx)
Check item(11).
Checking the +5V status register :
Send the following command from Termite.exe.
Send the transmission command "
i 0006 00FF 0001
" from Termite.
exe.
Move to the branch destination according to the value returned.
Example
i 0006 00FF 0001
HDMI in 4/5 "
00
"
(Detection of 5V is not OK.)
"00 or 04"
(Detection of DDC is not OK.)
"22"
(Detection of DDC is OK)
HDMI In4 "
22 or 20
" HDMI In5 "
11 or 10
"
(Detection of 5V is OK)
Go to
check item (13)
Go to
check item (14)
Go to
check item (15)
Check item(12).
Checking the +5V/DDC status register :
Send the following command from Termite.exe.
When the HDMI IN4, Send the transmission command "
i 0003 0054
0001
" from Termite.exe.
When the HDMI IN5, Send the transmission command "
i 0003 0024
0001
" from Termite.exe.
Move to the branch destination according to the value returned.
Example
i 0003 0054 0001
78
Caution in
servicing
Electrical
Mechanical
Repair Information
Updating
