Get
ting Star
ted
Connections
Set
tin
g
s
Remot
e Contr
ol
ZONE2
Inf
or
mation
Tr
oubleshooting
Specifications
ENGLISH
Adjusting the Sound and Picture Quality (Audio/Video Adjust)
Setting items
Setting contents
Audyssey Settings
Set MultEQ, Dynamic EQ
and Dynamic Volume.
NOTE
If you have not performed
Auto Setup, or if you change
the speaker settings after
performing Auto Setup, you
may not be able to select
Dynamic
EQ/Dynamic
Volume, and “Run Audyssey”
may be displayed.
In this case, either perform
Audyssey Auto Setup over
again or perform “Restore”
(
v
page 32) to return to the
settings after Audyssey Auto
Setup was run.
MultEQ :
Corrects both time and frequency response problems in the
listening area.
Audyssey :
Optimize the frequency response of all speakers.
Audyssey Byp.L/R :
Optimize frequency response of speakers except
front L and R speakers.
Audyssey Flat :
Optimize frequency response of all speakers to flat
response.
Manual :
Apply frequency response set with “Manual EQ” (
v
page
72).
OFF :
Turn “MultEQ” equalizer off.
“Audyssey”, “Audyssey Byp. L/R” and “Audyssey Flat” can be
selected after Audyssey Auto Setup has been performed. “Audyssey”
is automatically selected after performing Audyssey Auto Setup. “When
“Audyssey”, “Audyssey Byp. L/R” or “Audyssey Flat” is selected, “
”
lights.
After running Audyssey Auto Setup, if the Speaker Configuration,
Distance, Channel Level, and Crossover Frequency have changed without
increasing the number of speakers measured, only “
” lights.
If “Dynamic EQ” or “Dynamic Volume” is set to “ON” when “MultEQ”
is set to either “OFF” or “Manual”, “MultEQ” is automatically set to
“Audyssey”.
You can also press
MULTEQ
to set.
NOTE
“MultEQ” and “Manual EQ” cannot be selected when “EQ Customize”
is set to “Not Used” (
v
page 36, 37).
When using headphones, “MultEQ” is set to “OFF”.
•
•
•
•
•
•
•
•
•
•
•
Dynamic EQ :
Solves the problem of deteriorating sound quality as
volume is decreased by taking into account human perception and room
acoustics.
ON :
Use the Dynamic EQ equalizer.
OFF :
Do not use the Dynamic EQ equalizer.
After performing “Audyssey Auto Setup”, the “Dynamic EQ” setting
automatically becomes “ON”.
“
” is displayed when set to “ON”.
When “MultEQ” is set to “OFF” or “Manual”, “Dynamic EQ” is
automatically set to “OFF”.
If “Dynamic Volume” is set to “ON”, “Dynamic EQ” is automatically
set to “ON”.
When you set ”Dynamic EQ” to ”ON”, “Tone Control” is switched
”OFF”.
You can also press
[DYNAMIC EQ]
to set.
•
•
•
•
•
•
•
•
Setting items
Setting contents
Audyssey Settings
(Continued)
Dynamic EQ : ON/Volume : OFF
“Green”
“OFF”
Dynamic EQ / Volume : OFF
About Dynamic EQ
Audyssey Dynamic EQ solves the problem of deteriorating sound quality
as volume is decreased by taking into account human perception and
room acoustics. Audyssey Dynamic EQ works in tandem with Audyssey
MultEQ® to provide well-balanced sound for every listener at any volume
level.
Reference Level Offset :
Audyssey Dynamic EQ is referenced to the
standard film mix level. It makes adjustments to maintain the reference
response and surround envelopment when the volume is turned down
from 0 dB. However, film reference level is not always used in music or
other non-film content. The Dynamic EQ Reference Level Offset provides
three offsets from the film level reference (5 dB, 10 dB, and 15 dB) that can
be selected when the mix level of the content is not within the standard.
0dB
(Film Ref)
:
This is the default setting and should be used when
listening to movies.
5dB :
Select this setting for content that has a very wide dynamic range,
such as classical music.
10dB
: Select this setting for jazz or other music that has a wider dynamic
range. This setting should also be selected for TV content as that is
usually mixed at 10 dB below film reference.
15dB :
Select this setting for pop/rock music or other program material
that is mixed at very high listening levels and has a compressed dynamic
range.
Setting is enabled when “Dynamic EQ” is “ON” (
v
page 71).
•
•
•
•
Playback
“Red”
“Off”
Remote control operation
buttons
:Displaying the menu
Cancel the menu
:Moves the cursor
(Up/Down/Left/Right)
:Confirm the setting
:Return to previous menu
