For details on how to select, set and cancel settings for each menu, see “Menu Operations” (
v
page 19).
0
Getting
Started
Connections
Setup
Playback
Remote
Control
Multi-zone
Information
Troubleshooting
ENGLISH
g
EQ Preset
Set MultEQ XT related settings and Manual EQ beforehand.
EQ Customize
When MultEQ
®
XT and Manual EQ you are not using are preset,
MultEQ XT can be skipped when selected on the main unit or main
remote control unit.
n
Before running Auto Setup
[Selectable items]
Manual :
Used
Not Used
n
After running Auto Setup
[Selectable items]
Audyssey Byp. L/R :
Used
Not Used
Audyssey Flat :
Used
Not Used
Manual :
Used
Not Used
Direct Mode
Select “MultEQ XT” use for DIRECT or PURE DIRECT mode.
[Selectable items]
ON
: Use “MultEQ XT”.
OFF
: Do not use “MultEQ XT”.
Manual EQ
Adjust tonal quality for each speaker using graphic equalizer.
n
Default
Reset the settings to the default values.
n
Base Curve Copy
Copy the MultEQ XT “Audyssey Flat” correction curve.
n
Adjust CH
q
Select speaker adjustment method.
[Selectable items]
Each CH
: Adjust tonal quality for each speaker separately.
L/R CH
: Adjust tonal quality for each L/R speaker pair.
All CH
: Adjust tonal quality for all speakers together.
w
Select the speaker and frequency band and adjust the level.
[Selectable items]
63Hz
125Hz
250Hz
500Hz
1kHz
2kHz
4kHz
8kHz
16kHz
[Variable range]
–20dB
~
0dB
~
+6dB
“Base Curve Copy” is displayed after the auto setup procedure has
been performed.
Specifications
Zone Setup
Make settings for audio playback in a multi-zone system.
F
Menu screen
F
2.Manual Setup
2.HDMI Setup
1.Speaker Setup
4.Zone Setup
5.Option Setup
3.Audio Setup
2.ZONE3 Setup
1.ZONE2 Setup
2-4.Zone Setup
a
ZONE2 Setup
Make settings for audio playback in a ZONE2 system.
s
ZONE3 Setup
Make settings for audio playback in a ZONE3 system.
Bass
Adjust low frequency range (bass).
[Variable range]
–10dB
~
0dB
~
+10dB
Treble
Adjust high frequency range (treble).
[Variable range]
–10dB
~
0dB
~
+10dB
f
Auto Surround Mode
Make setting for memorizing surround mode setting for each
input signal type.
• The auto surround mode function lets you store in the memory the
surround mode last used for playing the four types of input signals
listed below.
q
Analog and PCM 2-channel signals
w
Dolby Digital and DTS 2-channel signals
e
Dolby Digital and DTS multi-channel signals
r
Multi-channel signals other than Dolby Digital and DTS (PCM,
DSD, etc.)
• When playing in the PURE DIRECT mode, the surround mode does
not change even if the input signal is changed.
[Selectable items]
ON
: Memorize settings. Most recently stored surround mode is
automatically selected.
OFF
: Do not memorize settings. Surround mode does not change
according to input signal.
HPF
When using speakers that cannot satisfactorily play low frequencies,
distortion of the bass sound can be reduced by setting “HPF” to
“ON”.
[Selectable items]
OFF
: The low range is not attenuated.
ON
: The low range is attenuated.
