Denon AVR 1909 - AV Receiver, Руководство пользователя

Страница: 61 / 92

Get
ting Star
ted
Connections
Set
up
Remot
e Contr
ol
Multi-z
one
Inf
or
mation
Tr
oubleshooting
ENGLISH
Specifications
Checking the SIRIUS Signal Strength
and Radio ID
1
Either turn
<SOURCE SELECT>
or press
[SAT TU1/2]
to select “SIRIUS”.
2
Press
<STATUS>
until “SIGNAL” appears on the
display.
The display will switch as shown below, depending on the
reception conditions.
Display Status
EXCELLENT
Signal strength is excellent
GOOD Signal strength is good
WEAK
Signal strength is weak
NO SIGNAL No signal
3
Adjust the position of the antenna until “SIGNAL:
EXCELLENT” is shown on the display.
4
Press
<STATUS>
until the channel you want to check
(example: “SR001”) is displayed.
5
Press
TUNING
and select channel 0 (SR000).
Channel No. and Sirius ID are alternately shown on the display.
SR000 SiriusID
************
b Write your own SIRIUS ID for storage use.
Sirius ID :
Sirius ID
The strength of both the SIRIUS and terrestrial signals can be checked
at menu “Input Setup” – “Antenna Aiming” (
v
page 43).
• The channel switches continuously when
TUNING
is pressed and
held.
• The song title, artist name, composer name, category and reception
level can be checked by pressing
<STATUS>
.
• The time (default : 30 sec) for which the on-screen display are
displayed can be set at menu “Manual Setup” – “Option Setup”
– “On-Screen Display” (
v
page 36).
Press
uio p
to return to the original screen.
Get
ting Star
ted
Connections
Set
up
Remot
e Contr
ol
Multi-z
one
Inf
or
mation
Tr
oubleshooting
ENGLISH
1
Press
SHIFT
to select the memory block (A to G).
2
Press
<PRESET>
or
[CHANNEL +/–]
to select the
desired preset channel (1 to 8).
Listening to Preset Channels
Pla
ybac
k
1
Either turn
<SOURCE SELECT>
or press
[SAT TU 1/2]
to select “SIRIUS”.
2
Set
[SOURCE CONTROL 1]
to “AUDIO” and
[SOURCE
CONTROL 2]
to “TUNER”.
(
v
page 65 “Remote Control Unit Operations”)
3
Use
TUNING
to select the channel.
When the channel is tuned in, the name of the track and artist
are displayed.
Basic Operation
Presetting Radio Channels
(Preset Memory)
Your favorite broadcast channels can be preset so that you can
tune them in easily. Up to 56 channels can be preset.
1
Tune in the broadcast channel you want to preset.
2
Press
[MEMORY]
.
3
Press
SHIFT
to select the block (A to G) in which the
channel is to be preset.
4
Press
<PRESET>
or
[CHANNEL +/–]
to select the
preset number (1 to 8).
5
Press
[MEMORY]
again to complete the setting.
To preset other channels, repeat steps 1 to 5.
NOTE
Preset channels are erased by overwriting them.