ENGLISH
19
Basic Operation
Basic Operation
Dolby Pro Logic
II
x (Pro Logic
II
) mode
• To play in the PL
II
x mode, set “S. BackSp” at the “Speaker
Configuration” setting to “1sp” or “2sp”.
• To play in the PL PL
II
x mode, set “Surround Back” at the
“Power Amp Assign.” setting.
1
Press the
STANDARD
button to select the Dolby
Pro Logic IIx mode.
• The Dolby Pro Logic
II
indicator lights.
Lights
DTS NEO:6
DOLBY PL
II
x
2
Play a program source.
Display
(Pro Logic
II
x Cinema mode)
(Pro Logic
II
x Music mode)
(Pro Logic
II
x Game mode)
When the “SB CH OUT” parameter is set to “OFF”. (Set
“S. BACK” at system setup to “NONE”.)
Display
(Pro Logic
II
Cinema mode)
(Pro Logic
II
Music mode)
(Pro Logic
II
Game mode)
(Dolby Pro Logic mode)
The mode switches as shown below each time the
STANDARD
button is pressed.
For operating instructions, refer to the manuals of the
respective components.
When the “SB CH OUT” parameter is set to “ON”. (Set “S.
BACK” at system setup to “SMALL” or “LARGE”.)
See “Surround parameters
q
” for a description of the
various parameters.
6
Turn the
SELECT
knob, and press the
CURSOR
F
F
or
G
G
button to set the various surround
parameters.
7
Press the
ENTER
button to finish the surround
parameter mode.
5
Press the
SURROUND PARAMETER
button, and
press the
CURSOR
D
D
or
H
H
button to select the
various parameters.
When the surround parameters are set using the buttons on
the main unit, stop operating the buttons after completing
the settings. The settings are automatically finalized and the
normal display reappears after several seconds.
SELECT
SURROUND PARAMETER
STANDARD
ENTER
STANDARD
CURSOR
SURROUND
PARAMETER
3
Press the
SURROUND PARAMETER
button to
select the surround parameter mode.
4
Turn the
SELECT
knob, and press the
CURSOR
F
F
or
G
G
button to select the optimum mode for
the source.
ENGLISH
• When making parameter settings, the display will return to the
regular condition several seconds after the last button was
pressed and the setting will be completed.
