Denon AVR-1705, Руководство по эксплуатации

Страница: 25 / 111

25
ENGLISH
5
Set the surround parameter according to the
source.
(Remote control unit)
NOTE:
• Please make sure the “AUDIO” position of
the slide switch on the remote control unit.
(Main unit)
• The mode switches as shown below each
time the button is pressed.
CINEMA EQ
TONE DEFEAT
SURROUND BACK
DEFAULT
D.COMP.
LFE
If you do want the bass and trable to be
adjusted, turn off the tone defeat mode.
6
Set the various surround parameters.
• CINEMA EQ setting
ON OFF
or or
CINEMA EQ OFF
• D. COMP. setting
OFF LOW MID HIGH
or or
D.COMP. OFF
NOTE:
• This parameter is displayed during DOLBY
DIGITAL playback.
• LFE setting
-10dB -5dB 0dB
or or
LFE 0dB
• TONE DEFEAT setting
ON OFF
or or
TONE DEF. ON
• SURROUND BACK SPEAKER setting
MTRX ON NON MTRX OFF
or or
SB : MTRX ON
NOTE:
• This parameter is displayed during DOLBY
DIGITAL playback.
• DEFAULT setting
YES NO
or or
DEFAULT Y/N
Select “Yes” to reset to the factory defaults.
7
Press the ENTER button to finish surround
parameter mode.
(Remote control unit)
NOTE:
• When making parameter settings, the display
will return to the regular condition several
seconds after the last button was pressed and
the setting will be completed.
Dolby Digital mode (only with digital input) and DTS Surround (only with digital input)
2 5 6 3
1 1 4
5
3
6 6
1
1
7
2
Playback with a digital input
1
Select the input source.
q
Select an input source set to digital
(COAXIAL/OPTICAL) (see page 15).
Example: DVD
w
Set the input mode to “AUTO” or DTS.
(Main unit) (Remote control unit)
(Main unit) (Remote control unit)
2
Select the STANDARD (Dolby/DTS Surround)
mode.
(Main unit) (Remote control unit)
4
Play a program source with the ,
mark.
DIGITAL
• The DTS indicator lights when
playing DTS sources.
Light
• The Dolby Digital indicator lights
when playing Dolby Digital
sources.
Light
Operate the SURROUND BACK button to
switch Surround Back CH ON/OFF.
(Main unit) (Remote control unit)
• Lights when the Surround
Back CH is on.
Light
3