5
Verticut T.T.
SP20007_REV_0
0DFKLQH'HVFULSWLRQ
Manufactured with a 20” (51cm) width, this range of machines is powered by a 5.5hp air cooled, single cylinder, four
stroke petrol engine.
The rear roller and cutter are controlled independently via belt clutches operated from the console on the upper handle
EDU,7(0$SDUNLQJEUDNHLV¿WWHGIRUDGGHGVDIHW\ZKHQZRUNLQJRQVORSLQJJURXQG
In the design of the machine, special attention has been given to the importance of easy service and maintenance with
the construction based on a sectional assembly system. These are the Engine Unit, the Cutter, the Rear Roller Unit, and
the Front Roller Unit, each of which can be readily removed individually from the main Frame Chassis Unit.
The interchangeable cassette system allows a variety of cassettes to be used for varying applications.
1. Verticut Head
9. Height Adjustment
2. Belt Guard
10.
On / Off Switch
3. Throttle Control Lever
11. Verticut Head Control Lever
4. Operating Console
12.
Air Filter
5. Exhaust
13.
Driving Control Lever
6. Fuel Tank
14.
Deadmans Handle
7. Brake Lever
15.
On / Off Switch
8. Grassbox
1
2
7
3
4
5
6
8
13
9
10
11
12
14
