Denison Hydraulics Jupiter 900, Руководство пользователя, Страница: 2 / 24

MANUFACTURER’S NAME
DENISON HYDRAULICS
MANUFACTURER’S ADDRESS
14249 Industrial Parkway
Marysville, Ohio 43040-9504, USA
declares that the product
PRODUCT NAME
Jupiter 900 Driver Card (Panel Mount Version)
PRODUCT PART NUMBER
S20-14087-0
conforms to the following
EMC: EN50081-2: March 1994 generic emissions for heavy industry
1
product specifications
EN55011: 7/1992 radiated or conducted EMI – 30-1000MHz
EN50082-2: 1995 generic immunity for heavy industry
1
ENV50140: 8/1993 – 10V/m, 80-1000MHz – Performance Criteria B
EN61000-4-2, IEC801-2 electrostatic discharge (ESD)
8KV air discharge – Performance Criteria A
4KV contact discharge – Performance Criteria A
EN61000-4-4: 5/1995 fast transient rejection
2KV power supply wires – Performance Criteria B
SUPPLEMENTARY
INFORMATION
This product is the panel-mounted version of the Jupiter 900 Driver, S20-14078, which
was tested in an EMC TEST Laboratory in Germany. The S20-14087 uses the same
electronic assembly as the S20-14078 less the Euro-style front panel assembly. Hence
by construction, this unit complies with the EMC Directive 89/336 and the CE Marking
requirements.
1
The product group was tested in a typical system configuration with DENISON
HYDRAULICS Jupiter Series products or recommended second source products.
The tested product was mounted in a NEMA 4 enclosure (or equivalent) and all cables
exiting the enclosure were shielded (screened). Enclosure and cable shields were con-
nected to earth ground (PE).
USA CONTACT
Office of Director of Quality
DENISON HYDRAULICS
14249 Industrial Parkway
Marysville, Ohio 43040
EUROPEAN CONTACT
DENISON HYDRAULICS Sales Office
or Office of Quality Manager
DENISON HYDRAULICS GmbH
Gerresheimer Strasse 9
D-40721 Hilden
Deutschland
See Installation & Operation Guidelines under Procedures.
DECLARATION OF CONFORMITY
PER EMC DIRECTIVE 89/336/EEC AND EN45014
i
Back to Content