Denios Secu Ex, Руководство по эксплуатации

Страница: 65 / 144

Turner
Operation
241109_Secu-Ex_004_INT 65 / 144
Ü
How to grip a drum with the turner
ü
Observe the Safety instructions for daily use [ } 5 5] !
ü
The drum shell is turned to the drum.
1. Lift the drum shell to mid-way up the drum
2. Position the drum lifter centrally in front of the drum
w
The drum shell is against the drum.
3. Apply both brakes [
}
5 7]
Fig. 44: Ratchet safety lock
4. Pull the ratchet safety lock and fully release the ratchet
Fig. 45: Thread the strap through the slotted shaft of the
ratchet
5. Place the strap around the drum and thread the end of the
strap through the slotted shaft of the ratchet
Pull the belt through the slotted shaft until it is tight
against the drum
Fig. 46: Tighten
6. Tighten until the strap is wrapped around the slotted shaft
2 or 3 times
Fig. 47: LOCK position
7. Pull the ratchet safety lock and position the ratchet in the
LOCK position
CAUTION! Loose tension belt! A falling drum
can cause damage and injuries. Only loosen
the ratchet when the drum is standing fully
flat on a firm surface.
8. Lift the attachment, until the drum lifts [
}
5 7]
þ
The drum is lifted (max. 30 cm above the floor). The brakes
may be released and the drum moved to its destination.