DA Series
Operation Manual
5
(6)
The relative humidity shall be less than 95%.
Fig. 3.1
3.2 Installation Location Requirements
The screw air compressor can be installed on any floor slab which may withstand the weight of the air
compressor without any special foundation, where the floor is smooth and horizontal. The air
compressor shall be fixed with foundation bolts; meanwhile rubber blanket shall be equipped to slow
down the vibration of the unit while being installed on the steel frame and mobile ships or vehicles.
3.3 Ventilation and Cooling Requirements
When installing the air compressor indoors or outdoors, good ventilation shall be ensure to
avoid heat short cycle or interaction effect from heat extraction of the machines, so the locations
of vent pipes, ventilating fans and compressors must be considered (there are typically three
ways, see Fig. 3.2).
