DA Series
Operation Manual
17
Please press “▼” and enter the following menu to select an interface:
5.2.2 View of operation parameter
Please press “▲” or “▼” and move the black scrollbar behind the “operation parameter” menu and the
sub-menu will pop up by pressing the key “Set”:
The following page will pop up by pressing “Right” again:
If it is the last level menu, there will be no black scrollbar on the interface. It will return to the previous
menu or main interface by pressing the return key “reset”. If the operation stops at a certain interface, it
will return to the main interface a few seconds later. The operation parameters such as runtime, runtime
for this execution, maintenance parameter, historical fault, date of production and field failure can be
observed and then return to the previous menu with the movement keys “▲” and “▼”, enter key “set” and
return key “reset” according to the above mentioned methods.
5.2.3 User parameter
a
Method to modify parameter
The user parameters can be reviewed and modified with the above mentioned methods to view the
operation parameters, such as modify upper pressure limit, and the methods are as follows:
Press “▲” or “▼” to move the black scrollbar behind the “user parameter” and the “Right” key will pop up:
Operation parameter
User parameter
Manufacturer parameter
Current of main engine and fan
Cumulative runtime
Runtime for this execution
Maintenance parameter
Main engine (A)
fan (A)
R: 0.0
0.0
S: 0.0
0.0
T: 0.0
0.0