Den-Sin H-110-200E, Руководство пользователя

Страница: 6 / 38

1. Getting acquainted with your High Pressure Cleaner
H-110-200E V00 Page 5
Operation
To prevent accidents from happening, ensure the safety of the person(s) who
uses the equipment and to protect bystanders and nearby placed inventory or
machinery, a few safety precautions needs attention.
1) T reat the machine as a high-speed cutting tool.
2) A nyone under the age of 18 is NOT allowed to use the machine.
3) A lways use a proper plug and socket specially designed with ground to earth wiring. Only
connect to an installation with earth wiring. A certified electrician shall make the
installation. It is strongly recommended that the electric supply to the machine include a
Residual Current Device/GFCI.
4) A lways keep the Water Blaster and its accessories in good working condition. Check the
machine for defects, especially the insulation on the electric cable. Do NOT start up the
machine if there is any defect. Have the machine serviced.
5) W hen using the Water Blaster and its accessories, eye protection must be worn to protect
against repelling or ricocheting matters causing eye damage.
6) S uitable clothing and footwear must be worn while using the equipment to protect the
operator. Do not try to clean clothes or footwear with the machine.
7) P recautions must be made to keep bystanders away from the working range.
8) D o NOT spray-clean on yourself, others or live animals. The
high-pressure beams are capable of making severe injuries.
9) D o NOT spray at electrical equipment OR the machine itself.
10) W hile repairing or servicing the equipment and its accessories always make sure the
machine is turned off and disconnected from the main power supply.
11) O nly allow instructed personnel to operate the machine.
12) A ctivating the trigger/gun can cause backward force therefore always hold spray lance
with both hands.
13) W hen pausing during operation, turned off the main switch of the machine and ensures
that the trigger/gun is locked.
14) O nly use high-pressure hoses, connections and nozzles specified by
DEN-SIN
.
15) IMPORTANT – Do not use the machine in a possible explosive environment in
accordance with EN-50014.
WARNING