OPTIONS SCREEN
The Options screen lets you select some configuration options, both on the
SensoSphere and for the App. Access it by touching the
Options
icon at the
bottom-left of the main screen.
➢
The
Audio Sense
switch lets you turn On or Off
on the audio interactivity in the SensoSphere.
➢
The
Proximity Sense
switch lets you turn On or
Off the IR sensors that enable the SensoSphere’s
hand gestures interface.
** These selections are non-volatile and will persist
even after the SensoSphere is powered Off.
➢
The
Bluetooth
switch lets you turn Off the
Bluetooth radio inside the SensoSphere. This can
be useful to enable an electromagnetic field free
zone. The SensoSphere will blink in red twice to
indicate that its Bluetooth is Off.
Naturally, once Bluetooth is Off you will lose
control of the SensoSphere from the App until
you restart Bluetooth on the unit and reconnect.
➢
The
Advanced Mode
switch lets you enable
some advanced functions in the SensoSphere;
refer to the next section for details on these
functions.
➢
Select the
App Language
according to your preference.
➢
Store current SensoSphere settings as startup values
records all current settings (including the
Colour Mode and Monochrome Colour) in the SensoSphere”s non
-volatile memory.
** As a security measure Brainwaves Intensity settings (see Advanced Options below) are always
reset to their normal values whenever the SensoSphere is turned Off.
➢
Set SensoSphere Password
enables you to define a password to prevent unauthorized
connection to your unit. To remove password protection, enter a blank password.
➢
Reset to Defaults
will restore all settings of the SensoSphere to their default factory values;
useful to bring the unit back to its original state.
➢
Disconnect
will disconnect the Bluetooth link between the App and the SensoSphere, bringing
you back to the Connection screen.
➢
The
Information
icon at the top-left opens a screen displaying information
about the App (
App version
) and the connected SensoSphere (
Model, ID
name, Firmware version, Bluetooth module version
).
** You can change the SensoSphere
ID name
by clicking on it and entering a new name with 3 to 5
characters. If you enter a blank name, the ID name will revert to a default ID number.
➢
Return to the main screen either by clicking
Done
at the bottom of the screen, or by swiping
the screen to the left
