Demco Kar Kaddy X, Руководство оператора

Страница: 20 / 28

Page 20 RD20026
1
16
19
15
17
20
7
8
9
20
14 13
2
6
3
4
5
11
12
10
18
NOTE: The spring return system has a small nut wedged
in the spring area for pre-load installation. Do not
remove nut. Nut will automatically drop out during
first braking period.
Surge Brake Parts List
Bleeding the Brakes
Brakes Breakdown
The first requirement for safe, sure hydraulic braking is the use of quality brake fluid. Use only DOT-3 or DOT-4 brake
fluid from a sealed container.
If pressure bleeding equipment is available, follow the manufacturer’s instruction in bleeding the system.
If system must be bled manually, proceed as follows: Fill master cylinder with fluid. Install bleeder hose on top bleeder
of first caliper to be bled.
NOTE: always bleed brakes by using the top bleed screw on the caliper.
Have loose end of hose submerged in brake fluid in glass container to observe bubbling.
By loosening the top bleeder screw located on the caliper one turn, the system is open to the atmosphere through
the passage drilled in the screw. Pump actuator with long steady strokes. The bleeding operation is completed when
bubbles no longer rise to the surface of the fluid. Be sure to close bleeder screw securely.
Repeat bleeding operation at each caliper. During the bleeding process, replenish the brake fluid, so the level does
not fall below the 1/2 full level in the master cylinder reservoir. After bleeding is complete, make sure master cylinder
reservoir is filled and filler cap is securely in place.
After the bleeding operation has been completed, apply pressure to the system and check the whole brake system for
leaks.
ITEM # PART # DESCRIPTION Qty
1 02196 BOLT .313NC X .75HEX HEX SELF TAPPING 8
2
02209
NUT, .438NF HEX HEAD GR.8 8
3 02377 BOLT .438NF X 1.50 GR8 EPOXY 8
4 03927 10” ROTOR 2
5
04174
WASHER, DRUM RETAINER, 12MM 4
6 04369 5-BOLT HUB/SPINDLE 2
7 05679 BRAKE FITTING .125 FULL FLOW 2
8 11617 QUICK COUPLER MALE 1
9 11618 FEMALE COUPLER 1
10 12445 SPRING RETURN SYSTEM 1
Please order replacement parts by PART NO. & DESCRIPTION.
ITEM # PART # DESCRIPTION Qty
11 12508 BRAKE HOSE, 63” 1
12
13047
GROMMET, 1.0625”OD X .500”ID 1
13 13825-92 WHOLE CALIPER 2
14 13920-92 CALIPER MOUNT 2
15 14533 9” .188 BRAKE LINE 1
16 16677 CLAMP WIRE .375 GALV W/ VINYL 6
17 16678 BRAKE LIKE 48” 2
18 6057 ACT DA91 DROP TUBE 6000# DISC 1
19 SB7785 FTG, TEE, .188” UNION, W/ MTG BRACKET 1
20
SB7H67
BRAKE HOSE, 7” SWIVEL MALE & SOLID FEMALE 2
Please order replacement parts by PART NO. & DESCRIPTION.