Demco Gravity Flow 550, Руководство пользователя

Страница: 20 / 28

Page 20
dooR lIfT AsseMbly bReAKdoWN
To prevent personal injury or property damage, all users of this
equipment should read, understand, and follow these instructions.
* Never overload wagon. The rating of the GF550 gear is 36,000 lbs.
or the rating of the tires, whichever is less. The GF650 gear rating is
44000 lbs. or the rating of the tires, whichever is less. Overloading
wagon is dangerous and can cause extensive damage to both the box
and running gear.
* Never add more sideboards or extensions to the gravity box, beyond
the standard factory manufactured parts, as the box is not designed
to handle the added weight.
* Check box periodically for cracks in welds and other structural
damage. Have cracked welds fixed immediately. Failure to do so
could result in extensive damage to the gravity box and thus greatly
reduce life of box.
* When pulling gravity box and running gear, be sure that it is fastened
securely to tractor. Also connect the emergency brake chain to towing
vehicle and be sure lighting is connected and working properly.
MAINTeNANce ANd GeNeRAl oPeRATIoNs of GRAvITy WAGoN
* Be sure to read all warnings, caution, and important labels on equipment,
they are designed for your safety and for longer life of equipment.
* Periodically check all bolts and nuts to ensure proper tension or
torque. Torque lug nuts daily.
* Grease all zerks before each use using a good quality lubricant .
* Before towing be sure master cylinder is full of brake fluid and check
lines for leaks. Inspect the actuator for bent or worn parts. Replace
parts if necessary. Make sure the actuator mounting bolts are tight.
* Periodically check braking quality. If you think they are a little soft,
check the movement on the actuator. If it moves more than 7/8”, the
brake shoes need to be adjusted. Failure to do so can result in loss
of braking.
* If units are used in corrosive conditions the actuator and wheels
should be washed out with high pressure water. When actuator parts
are dry, oil all moving parts and repack wheel bearing.
Periodic servicing of this unit will greatly prolong its usable life.
cAuTIoN
Ref.No. PART No. qTy. descRIPTIoN
1.
00004
2 5/16” Flatwasher
2. 00059 5/4 3/8” Flatwasher
3. 00179 1/2 3/8”-16UNC Center-punch Locknut
4. 00523 1/4 3/8”-16UNC x 1 1/4” Hex Head Bolt, Gr. 5
5.
00907
4 3/8”-16UNC x 1” Hex Head Bolt Gr.5
6.
01114
1 3/4” OD x 3/8” ID Bushing
7. 01115-95 1 1 1/4” OD x 3/4” ID Bushing (plated)
8. 01243-30 1 Roller Brace Bracket
9. 02028 1 10 Tooth Sprocket (#40)
10. 02384 1 1/2” NR Machine Washer, 14 Ga
11.
02467
1 3/8”-16UNC x 1” Carriage Bolt, Gr. 5
12.
02592
6/8 3/8”-16UNC Nylon Insert Locknut
13. 03096 1 1/4” x 1 1/4” Roll Pin
14. 06926 1 3/8”-16 UNC x 2 1/2” Carriage Bolt, Gr. 5
15. 09552-95 1 2” OD x .25 Thick Washer (plated)
16. 10629-30 1 Door Opener Wheel (black)
17.
11412-30
1 Latch (black)
18.
11414
1 Bushing
19. 11459-30 1 Backplate (black)
20. 11460-30 1 Channel (black)
21. 11461 1 Opener Shaft
22.
11462
1 28 Tooth Sprocket (#40)
-
11463
1 Chain, #40 x 38 Links
23. 11749 1 9 Tooth Sprocket (#60)
24. 11750 1 5/16” x 1 1/2” Roll Pin
25. 11751 1 5/16” x 2 1/2” Roll Pin
26. 14402-30 1 Latch (black) (750 bu.)
27.
14403-30
1 Channel (black)
28.
14404-30
1 Backplate (black)
29. 14405-30 1 37 Tooth Sprocket
- 14406 1 Chain, #40 x 44 Links
30. 14407-30 1 Ratchet Plate
6031 - dooR lIfT AsseMbly
30
29
28
27
26
25
24
23
5
5
8
9
7 6
3
10
2
12
11
13
14
2
2
12
12
3
21
18
15
1
4
4
12
16