Manual Mode Setting
1. Switch on the PCB switch, then press the MANUAL/PAUSE button to enter manual
mode.
2. Press the TEMP button. The temperature set-point (S/T: XX.X°C) at the bottom right
of the screen will flash and you can use the – and + buttons to set your temperature.
3. Press the POWER button. The power set-point (S/P: XXXXW) at the bottom left of
the screen will flash and you can use the – and + buttons to set your wattage. We rec
-
ommend 3000W for raising temperature up between steps. 1500W during your mash-
ing phase to maintain mash temperature. And once boiling, drop to 2500W to maintain
a rolling boil.
8.