Auto Mode Setting
1. Switch on the PCB switch, then press the AUTO/PAUSE button to enter auto mode.
S1 (Stage 1) will be displayed in the top left corner of the screen.
2. Press the TEMP button. The temperature set-point (S/T: XX.X°C) at the bottom right
of the screen will flash and you can use the – and + buttons to set your temperature.
3. Press the POWER button. The power set-point (S/P: XXXXW) at the bottom left of
the screen will flash and you can use the – and + buttons to set your wattage. We rec
-
ommend 3000W for raising temperature up between steps. 1500W during your mash-
ing phase to maintain mash temperature. And once boiling, drop to 2500W to maintain
a rolling boil.
4. Press the TIMER button. The time (XX min) at the top right of the screen will flashing
and you can use the – and + buttons to set your countdown timer.
10.
