DEMAG DRC-10, Руководство по эксплуатации

Страница: 34 / 48

34
21492044.indd/131
107
The following data can be displayed via the Information menu:
Code Information
401 Remaining duration of service in % (determined from load spectrum)
400 Operating hours
000 Permissible full load hours acc. to FEM classification
001 Gearbox transmission ratio
002 Drum diameter
003 Reeving factor
004 Control type (travelling hoist or crane control)
005 Solo travelling hoist (with/without crane control)
146 Customer number
147 Order number
148 Serial number
149 Year of manufacture
150 Hoist speed V1
151 Hoist speed V2
152 Lifting height
153 Reeving
155 Rope diameter
171 Country code
216 Serial number of control system
217 Hardware version
520 Software version of main controller
529 Software version of monitoring controller
The following additional information is available with the “Status analyses” option:
Code Information
402 K1 switching operations
403 Hoist brake switching operations
404 Travel path in m
405 K2 switching operations
406 K3 switching operations
416 Number of times slip limit is exceeded
417 Number of times max. speed is exceeded
418 Number of hoist brake errors
419 Number of times the overspeed brake is triggered
420 Number of overloads
421 Number of emergency stop actuations during motion of min. one
axis
448 Last occurring error
449 Last but one occurring error
Sequence and quantity of information depend on the software and may be
changed.
The following example shows the remaining duration of service:
9.6 Data of the
Information menu
K564
14.6%
401:
42660844.eps