DEMA TITAN II T-812-DL, Руководство пользователя, Страница: 13 / 16

I-1024
Rev. G-43816
Page 13 of 16
3/23/18
ALARM DELAY (5 seconds to 10 minutes)
02:00 mm:ss
FEED LIMIT (5 seconds to 10 minutes)
10:00 mm:ss
RETURN TO

SYSTEM ACCESS
RECHARGE TIME (1 second to 5 minutes)
00:01 mm:ss
(Either DEAD CYCLES or DWELL TIME will display depending on weather DOOR or CONVEYOR was
selected earlier under MACHINE TYPE)
INITIAL CHARGE (1 second to 10 minutes)
00:15 mm:ss
CHARGE CLOCK (10 minutes to 16 hours)
01:00 hh:mm
(Everything in this block is displayed in Probeless Mode only. Otherwise continue below the block.)
RETURN TO

SYSTEM ACCESS
RINSE SPEED
50 0 – 100%
RINSE DELAY
1 0 – 15s
RINSE LIMIT
-- 15 – 70s
RINSE LENGTH (The length of the rinse cycle for one rack.)
12 5- 75s
PROBELESS
PARAMETERS
1 0-10
DWELL TIME ( Conveyor machine only.)
01:30 mm:ss
( Door machine only .) DEAD CYCLES
DETERGENT ALARM
INACTIVE DETERGENT ALARM
ACTIVE DETERGENT ALARM
MANUAL
DETERGENT TYPE
LIQUID DETERGENT TYPE
DRY
Note: When detergent type is liquid, the alarm is active, and the control is set to probeless, use a DEMA
82.15.1 Low Level Probe connected to the probe input.
DET. ALARM CAL.
CAL CHEM ENTER
DET. ALARM CAL.
CAL WATER ENTER
DET. ALARM CAL.
CALIBRATING
DET. ALARM CAL.
CALIBRATING
DET. ALARM CAL.
SUCCESSFUL DET. ALARM CAL.
FAILED
RINSE CONTROL
PARAMETERS