DeLuxe Stitcher M27 Series, Руководство по эксплуатации и обслуживанию

Страница: 24 / 44

Note: At this point it may be necessary to reselect one (1) of the nine (9) Control Collar slots for
the Brake Spring Tang (release Actuator Lever, remove the Clutch Spring tang from the slot, then
move Control Collar axially toward the Input Hub end and rotate it opposite to the drive direction to
pick up the next slot). Continue to select Control Collar slots until the 0.38" to 0.50" specification is
achieved.
Assemble the Retaining Ring to the Output Shaft at the Input Hub end (the smooth surface facing the
Input Hub). Check the end play between the Input Hub and the Retaining Ring with feeler gauge.
There should be 0.002" to 0.003" end play on the Input Hub.
Reassemble the unit to the machine.
Note: After the Clutch is assembled to the machine, the Clutch Plate should be free to float on bearing
- the Anchor Strap is only there to prevent rotation of the plate.
22
SPLIT CAM DESIGN CONTROL COLLAR
Retaining
Ring
Drive
Sleeve
Stop
Cam
Coupling
Sleeve
Brake
Sleeve
1 Thrust Washer (Input) N/A
2 Input Hub Assembly w/Roller Bearing 851321
3 Control Collar Assembly 850888
4 Drive Spring 850889
5 Anti-Overrun Spring ***NOT USED*** N/A
6 Output Assembly SPCL 850891
7 Anti-Back Spring 850962
8 Brake Spring 850889
9 Brake Hub w/Roller Bearing 850892
10 Plate Assembly 850890
11 Thrust Washer (Plate Hub) 851126
12 Actuator Assembly w/Plunger 850992
13 Button Head Cap Screw N/A
14 Coil Assembly - 230V-50Hz 850998
Coil Assembly - 115V-60Hz 850999
15 Headless Socket Set Screw N/A
16 Retaining Ring 850886
17 Shims N/A
18 Shims (Clutch Shim .005") 851126
Shims (Clutch Shim .010") 851127
19 Spacer N/A
Item Description Part No. Item Description Part No.
Figure 12 - Clutch-Brake