INSTALLATION:
CAUTION: DO NOT INSTALL THE ALARM IN NEW OR RENOVATED
BUILDINGS UNTIL ALL WORK IS COMPLETED, INCLUDING PAINT-
ING AND FINAL CLEANING (EXCESSIVE FUMES FROM PAINTS; SOL-
VENTS, MAY CAUSE DAMAGE AND DIRT OR DEBRIS MAY BLOCK
THE GAS ENTRY).
The CO Alarm is designed for easy installation. It comes completely with
mounting kit. All you have to do is attach the mounting bracket to the wall with
the fixing screws provided.
Warning: Wiring should be installed
only by a qualified electrtian.
Loosen the mounting bracket
1.
by pushing it upwards and then
fasten it onto the ceiling/wall
with the enclosed screws.
Connect the battery with + ve
2.
and – ve in the correct position
and close the battery cover.
Connect snap contact to relay
3.
base and all connecting wires
through the cable entry.
Fix CO alarm to the relay base
4.
with the screws provided.
Hook the relay base on bracket
5.
until it locks in place. Now, test
the alarm by pressing in the test
button for a few seconds until
the alarm sounds.
LOCATION – WHERE TO INSTALL CO ALARM
Minimum Protection
Added Protection
The alarm should be installed in every level of your home, preferably in
•
every room. If this is not possible, install at least one alarm near or within
