1
July 2013
DL-480
Adjusting Ticket Dispenser
Owners Manual
The DL-480 is a versatile ticket dispenser. It has both a 4 wire DL-1275 style input and a 6 pin DL-4 style
input. Each input can be independently configured to adjust the ticket payout. The inputs can be
configured to either multiply or divide the payout by a set factor, or to give a fixed quantity of tickets
instead of the normal payout.
Pins 3 and 4 of the DL-4 input can be connected to a coin switch to dispense “mercy tickets” while also
using the DL-1275 input to dispense earned tickets.
The DL-480 inputs and outputs can also be individually configured to use standard or inverted polarity.
Configuration
The DL-480 has 2 push buttons and a set of 4 DIP switches that are used to configure it. Configuration
settings are not changed until the entire procedure is completed. If you make a mistake, remove and
reapply power, and then start over.
1.
Connect the DL-480 to the game. Then apply power.
2.
To enter programming mode. Press both buttons the same time. The LED will come on.
3.
Set the DIP switches for the motor speed as seen by the game and the adjustment mode for the DL-
1275 style input (see Table 1). Most games can use high speed, but some older games may require
standard speed.
Содержание DL-480
Страница 4: ...4 July 2013...
