9
8) The LED on the smart alligator clips will then turn solid GREEN. Wait 5 to 10
seconds then start your vehicle
9) Remove the clips
IMMEDIATELY
after the vehicle has started. Black negative
clamp first.
10) DO NOT use the Vehicle Jump Starter to repeatedly try and start your vehicle.
Wait at least thirty (30) seconds between attempts. Check vehicle after three
attempts.
SMART ALLIGATOR CLIPS
The smart alligator clips contain a
Green
and
Amber
LED along with a warning
buzzer for Faults and Error protection:
1) If correctly connected to the battery the LED on the smart alligator clips
should go from flashing
Green
to solid
Green
.
2) Standby Mode – Clips are not connected, or bad connection – The
Green
LED Flashes.
3) If the lithium battery pack of the jump starter is lower than 14V, the
Amber
LED will light up solid and buzzer beeps slowly.
10
PORTABLE INFLATOR FEATURES
4) If lithium battery pack of the jump pack is higher than 17.5V, the
Amber
LED
will light up solid and buzzer on sold. (Smart clips plugged into incorrect
voltage jump pack)
5) Alligator clips connected to vehicle battery in reverse polarity. (Red clip to
Black negative terminal, Black clip to Red positive terminal).
Amber
LED
lights up solid and buzzer beeps rapidly.
6) Short circuit protection -,
Amber
LED lights up solid and buzzer beeps rapidly
7) Overheat protection -,
Amber
LED flashes. Buzzer beeps slowly.
1) Connect the supplied air hose to the connection on the end on the unit.
2) Press and hold the
“Power Button”
for 2 seconds and the
power will come on; the battery percentage will be displayed on the LCD
screen.