User Manual for PC-80D Easy ECG Monitor
13
5.2 Waveform Review
In the record list, selecting a record, then press “
”ok key, the quick measurement record is shown in the
figure 5-3; the external lead wire measuring records is shown in figure 5-4.
On-screen display:
(1)
“
”: Measured ECG waveform
(2) “ ”: Mark corresponding to 1mV amplitude
(3) “
”: ECG waveform snap-shot
(4) “
”: Zooming box for ECG waveform
(5) “
”: Mark of irregular segment of waveform. Please refer to appendix 2 for detailed information.
Notes:
The Zooming box contains
ECG waveform measured in about 3~4 seconds.
1. For quick measurement by built-in electrodes, the display will review this record automatically, press
“
” ok key, the display will browse the recorded waveform automatically, Press it again to stop the
browsing operation; Press the “
/
” can scroll the waveform manually. When the review is finished,
press “
” ok key to bring the measurement result, as shown in figure5-5, in the measuring result screen,
press “
” ok key, it prompts “Are you sure to delete this record?”, as shown in figure 5-6 screen. You can
delete this record according the prompts.
2.
For external lead wires measurement (limb lead and chest lead), the display shows 5 lines of
compressed waveform, every line contains 30 seconds of waveform data as shown in figure 5-4. Press
the
“
/
” key to move the grey zooming box pane, press “
” ok key to zoom in the waveform
display within the grey zooming box.
The chest lead review screen is shown in figure5-7; the limb lead review screen is shown in figure 5-8.
Figure 5-5
Figure 5-4 Review
（
External electrodes
）
Figure 5-6
