Delta Vivitek NovoDisplay DK430, Руководство пользователя

Страница: 50 / 53

NovoDisplay User Manual
Copyright © 2019 Vivitek. Vivitek is a trademark of Delta Electronics, Inc.
50
Troubleshooting
If the display does not function normally
Remote control failure
1
Check whether there are other objects between the remote control and
the IR sensor window, thus leading to remote control failure.
2
Check whether the battery electrodes in the remote control are in the
correct orientation.
3 Check whether remote control needs to replace its batteries.
Machine automatically shuts down
1 Check whether sleep is set or not.
2 Check whether there has been a sudden power outage.
3
Check whether there is a signal (the display may power off after a
period of inactivity).
PC mode issues
Signal is out of range
1 Check whether the display is setup correctly.
2 Check whether the resolution is the best resolution.
Background has vertical lines or
streaks
1 Select auto correction in the OSD settings menu.
2 Adjust the clock and phase values in the OSD settings menu.
Image lacks color or the color is
incorrect
1
Check whether the video cables are well connected or have quality
problems.
2 Adjust brightness or contrast values in the OSD settings menu.
The display format is not
supported
1 Select auto correction in the OSD settings menu.
2 Adjust the clock and phase values in the OSD settings menu.
Videos do not function normally
No picture and no sound
1 Check whether the machine is in a powered state.
2
Check whether signal cable is plugged in correctly, and whether the
correct input source is selected.
3
If the display is in internal computer mode, check whether internal
computer is started.
The image features horizontal or
vertical stripes or image dithering
1 Check whether signal cable is plugged in correctly.
2
Check whether other electronic equipment or power tools are placed
around the machine.
No color, color is weak, or image
is weak
1 Adjust brightness or contrast values in the OSD settings menu.
2 Check whether signal cable is plugged in correctly.
Audio does not function normally
Images is shown without sound
1 Check whether the mute button has been pressed.
2 Press VOL + / - to adjust volume.
3 Check whether the audio line is connected correctly.
Only one speaker has sound
1 Adjust the sound balance in the OSD settings menu.
2
Check whether the computer
’s sound control panel has only set up one
sound channel.
3 Check whether audio line is connected correctly.
VGA output is shown without
sound
1
Check whether the audio out jack of the external device is connected to
the audio in jack.