Delta Vivitek NovoDisplay DK430, Руководство пользователя

Страница: 26 / 53

NovoDisplay User Manual
Copyright © 2019 Vivitek. Vivitek is a trademark of Delta Electronics, Inc.
26
DK650 / DK750
Ensure that all the following parts are included in the wall mount kit:
Letter Item Quantity
A Horizontal Beam Bracket 1
B
Vertical Beam Bracket 2
C
M8x80mm Expansion Screws (Blue Zinc Plated) 8
D M4x10mm Round Head Machine Screws with Spring Washers (Black Zinc Plated) 2
E M5x100mm Screws 2
To mount NovoDisplay onto a wall follow the instructions below:
1. Install the two (E) M5x100mm screws into the (B) vertical beam brackets on the
display with a depth of 2 - 10mm.
NOTE: DO NOT fully screw the M5x100mm screws into the bracket, only screw the screws
with a depth of 2 - 10mm as a gap is needed between the ends of the screws and the top of
the compartment in the bracket to firmly secure the display in the final step of this
procedure.
2. Place the (A) horizontal beam bracket up against the wall in the desired position and
mark the screw locations on the wall so that there are four equally balanced screw
locations on both the upper and lower parts of the bracket.