Delta VFD-BW Series, Руководство пользователя

Страница: 73 / 251

Chapter 5 Parameters
|
VFD-BW Series
5-8 Revision May 2009, BWE0, SW V1.05
Parameter Explanation Settings
Factory
Setting
Customer
03: Fan ON to run when preliminary
heatsink temperature attained
03-13 Mechanical Brake
Release Frequency
0.00~400.00Hz 0.00
03-14 Mechanical Brake
Engage Frequency
0.00~400.00Hz 0.00
03-15 Mechanical Brake
Engage Time at Stop
0.0~600.0 sec 5.0
Group 04 Input Function Parameters
Parameter Explanation Settings
Factory
Setting
Customer
04-00 AVI Analog Input Bias 0.00~200.00% 0.00
00: Positive bias 00 04-01 AVI Bias Polarity
01: Negative bias
04-02 AVI Input Gain 1~200 % 100
00: No AVI negative bias command 00
01: Negative bias: REV motion enabled
04-03 AVI Negative Bias,
Reverse Motion
Enable/Disable
02: Negative bias: REV motion disabled
(Motion direction is controlled by digital
keypad or external terminals.)
04-04 Multi-Function Input
Terminal 1 (MI1)
00: No function
01: Multi-Step speed command 1 01
04-05 Multi-Function Input
Terminal 2 (MI2)
02: Multi-Step speed command 2
03: Multi-Step speed command 3 02
04-06 Multi-Function Input
Terminal 3 (MI3)
04: Multi-Step speed command 4
05: External reset (N.O.) 03
04-07 Multi-Function Input
Terminal 4 (MI4)
04
04-08 Multi-Function Input
Terminal 5 (MI5)
05
04-09 Multi-Function Input
Terminal 6 (MI6)
06: Accel/Decel inhibit
07: Accel/Decel time selection command 1
for Accel/Decel time 1/2
08: Accel/Decel time selection command 2
for Accel/Decel time 3/4
09: External base block (N.O.)
06
10: External base block (N.C.)
11: Up: Increment master frequency
12: Down: Decrement master frequency
13: Counter reset
14: Run PLC program
15: Pause PLC program
16: Auxiliary motor No.1 output disable
17: Auxiliary motor No.2 output disable
18: Auxiliary motor No.3 output disable
19: Emergency stop (N.O.)
20: Emergency stop (N.C.)
21: Master frequency selection AVI/ACI
ON: ACI; OFF: AVI
22: Master frequency selection AVI/AUI
ON: AUI; OFF: AVI