Delta TP70P, Быстрый старт

Страница: 31 / 65

T P 7 0 P Q u i c k St a r t
If the users want to add an object to a page, they have to click an object type on the object toolbar, click where
they want to begin the selection of an area in the working area, hold down the left mouse button, and drag the
cross over the area that they want to select.
After the users add an object, they have to set the parameters related to be object. After users double-click a
button in the working area, the
Button Setting window will appear. In the example in this chapter, Y0 in TP70P
is used to control the forward rotation of an AC motor drive. If a button is pressed, M0 will be ON. If M0 is ON,
Y0 will be ON. If the button is pressed again, M0 will be OFF. Consequently, the button type selected in the
Button Type drop-down list box is Push On/Off , and the Internal PLC Setting option button and M0 in the
Refer Device window are selected.
2 - 1 0