Delta SVG300A43A-11, Быстрая звезда

Страница: 75 / 127

Product Installation
2-7
S id e S p a c e
IP21 /IP54
≥
4 85.0 mm (19 .09")
5
8
8
.3m
m
(
23.
16")
1 50°
S V G3 0 0 S V G5 0 0
IP21/IP5 4
≥
658.0mm ( 25.91 ")
7
8
8
.1m
m
(
31.
03")
1 5 0°
S id e S p a c e
Ca b le S p a c e
IP21/IP54
≥
460m m
(18 .11")
≥
100 mm
(3 .94")
S V G3 0 0
IP21 /IP54
≥
694.0mm (2 7.32 ")
≥
99 .0mm
( 3.90 ")
S V G 5 0 0
Ca b le S p a c e
Figure 2-1b
4. Cable entry space: When cable trenches are used (as shown in Figure 2-1b), be careful of
where the cabinet is being installed. The "Cabinet cable entry hole" must be
right above the cable trenches with a distance of no greater than 645 mm
(25.39 inches), as shown in Figure 2-2.
(A) At the location where the cabinet is going to be placed, some spaces must be reserved
to support the cabinet. Reserved supporting spaces are shown in figure 2-2, please
keep the distances at 55~100mm (2.16~3.94 inches), to ensure the cabinet is installed
securely. Note: Must be placed on level ground.
(B) Cooling air must not be allowed to enter the cabinet through the base board via the
cable trenches. To ensure the cabinet's protection rating, please select Delta's wiring
board. If the customer's own wiring board is used, please make sure to check its
protection rating, and confirm that it complies with fire safety and EMC requirements. If
the cabinet is damaged due to customer's own wiring board, the customer shall be
responsible for any resulting service fees. See figure 2-3.