Delta ShopMaster CL180BN Скачать руководство пользователя страница 10 | Manualshive

Страница: 10 / 17

Delta ShopMaster CL180BN Скачать руководство пользователя страница 10

10

14. Do not charge battery pack

when the temperature is BELOW 40°F

(4.4°C) or ABOVE 104°F(40°C). This is very important for proper
operation.

15. Do not incinerate battery pack.

It can explode in a fire.

16. Do not charge battery

in damp or wet locations.

17. Do not attempt

to charge any other cordless tool or battery pack with

the Delta charger.

18. Do not short across

the terminals of the battery pack: EXTREMELY

HIGH TEMPERATURES COULD CAUSE PERSONAL INJURY OR FIRE.

19. Double insulated tools are equipped with a polarized plug (one

blade is wider than the other). This plug will fit in a polarized outlet
only one way. If the plug does not fit fully in the outlet, reverse the
plug. If it still does not fit, contact a qualified electrician to install a
polarized outlet. Do not change the plug in any way.

Double

Insulation

eliminates the need for the three wire grounded power

cord and grounded power supply system.

20. Dispose of expended batteries properly.

The

Delta Battery Packs contains rechargeable, nickel-
cadmium batteries. These batteries must be
recycled or disposed of properly. Drop off
expended battery packs at your local replacement
battery retailer, your local recycling center, or at a
Delta Service Center (see list on back page of this
manual). Applicable fees for the collection and
recycling of these batteries (in the United States),
have been paid to the RBRC

™

. For further

information, call: 1-800-8-BATTERY.

FOREWORD

Delta Model CL180BN Cordless Brad Nailer is a heavy duty pneumatic brad
nailer. It is designed to install 18 ga. brad nails of various lengths (from

5

/

8

" to

1

1

/

4

" long).

SOLD ONLY IN COMBO KIT CL180WWK that includes;

1) CL180 - Drill

6) CL180BN - Brad Nailer

2) CL180C - Charger

7) CL180FL - Flashlight

3) CL180CS - Circular Saw

8) CL180B - Battery - 2

4) CL180JS - Jig Saw

9) Case

5) CL180PS - Pad Sander

CHARGING THE BATTERY

Before using your cordless tool for the first time, fully charge the battery
pack. If the battery pack is installed in the tool, remove it by following
instructions under

INSTALLING OR REMOVING BATTERY PACK.

RBRC™ is a Trademark of
the Rechargeable Battery
Recycling Corporation.

BATTERY CHARGING AND INSTALLATION

FUNCTIONAL DESCRIPTION

CARTON CONTENTS

SAVE THESE INSTRUCTIONS!

«
...
8
9
10
11
12
...
»

Содержание ShopMaster CL180BN


















Отзывы:

Нет отзывов