User Manual
Code: ETH10-2WIRE-SET
SET OF UTP / 2-WIRE CONVERTERS FOR LAN+POE TRANSMISSION ETH10-2WIRE-SET 2 PCS
SET ATTE
DELTA-OPTI Monika Matysiak; https://www.delta.poznan.pl
POL; 60-713 Poznań; Graniczna 10
e-mail: [email protected]; tel: +(48) 61 864 69 60
2022-11-15
ETH10-2WIRE-SET
4/6
Examples of connection diagrams:
1 mode:
Receiver without PoE power supply
2 mode:
The camera is powered from PoE via the 2-WIRE line.
In such a configuration, attention should be paid to voltage drops in the 2-WIRE line.
The PoE budget delivered to the camera depends on the diameter of the wires and the length of the cable used.
2 mode:
Powered by the power adapter.
The camera is powered from PoE via the 2-WIRE line.
In such a configuration, attention should be paid to voltage drops in the 2-WIRE line.
The PoE budget delivered to the camera depends on the diameter of the wires and the length of the cable used.
The ETH10-2WIRE transmitter and receiver will work properly in the 10-56V voltage range, but the camera connected to the receiver usually
requires PoE power supply at 44-56V.
