User Manual
Code: ETH10-2WIRE-SET
SET OF UTP / 2-WIRE CONVERTERS FOR LAN+POE TRANSMISSION ETH10-2WIRE-SET 2 PCS
SET ATTE
DELTA-OPTI Monika Matysiak; https://www.delta.poznan.pl
POL; 60-713 Poznań; Graniczna 10
e-mail: [email protected]; tel: +(48) 61 864 69 60
2022-11-15
ETH10-2WIRE-SET
2/6
The ETH10-2WIRE-SET set includes transmitter and
receiver modules, it is used for Ethernet data and PoE
power supply transmission using 2 wires, e.g. one pair
of UTP twisted pair cable.
The devices allow the installation of cameras or other
IP PoE devices in places where replacement of the
existing cabling is impossible or unprofitable. The
ETH10-2wire-TX module is powered from any PoE
switch (RJ45 port) and then via 2 wires, it enables two-
way network communication and powering the
ETH10-2wire-RX module. The camera or another PoE
receiver can be connected to the RJ45 port of the
ETH10-2wire-RX module at the end of the line. The
devices can be optionally powered from the POWER
screw terminals.
Depending on the selected converter operation mode,
powering them and devices connected to them can be
realized in several ways. PoE power supply or from an
external power supply, both from the ETH10-2wire-TX
transmitter and the ETH10-2wire-RX receiver
(configuration with jumpers).
Connectors:
• 1 pcs RJ45
• 1 pcs terminals (screw terminals) - 0.32 ... 3.3 mm² ( 22 ... 12 AWG )
LAN ports:
1 pcs RJ45 10 Mbps
Connectors description:
ETH10-2WIRE-TX :
• PoE IN - Passive PoE ≤ 30 W, PoE (802.3at) ≤ 30 W, PoE (802.3af) ≤ 15 W
("+/-": 1, 2 pins; "+/-": 3, 6 pins) or ("+/-": 4, 5 pins; "+/-": 7, 8 pins)
• Power
• DATA - 2-wire
ETH10-2WIRE-RX :
• PoE OUT - Passive PoE
("+": 4, 5 pins; "-": 7, 8 pins)
• Power
• DATA - 2-wire
Transmission speed:
10 Mbps
Transmission range:
• 1000 m @ 2-wire
• 100 m @ UTP : Switch PoE - ETH10-2WIRE-TX
• 100 m @ UTP : ETH10-2WIRE-RX - IP Camera
LED indicators:
• Power
• LAN
• 2-wire
Protections:
• Overvoltage - LAN, DATA
• Protection against reverse polarity connection - Power
• Overload 0.6 A - PoE IN ETH10-2WIRE-TX
Main features:
• Plug & Play
• Support for IP cameras and network devices
• Full transparency for networks
• Operation modes - Set with jumpers
