11.0 Installation of Chamber - Section B3
Mark position of the 40mm pipe on the side of
the chamber and cut out the marked line using a
1.5"/40mm holesaw.
Saw off 110mm socket end/s to be used.
13
15
Cut 40mm pipe to length allowing an overhang of
35mm inside the chamber.
14
Connecting perimeter channel via a 1.5"/40mm inlet pipe
Attach a DMS-341 adaptor to the 40mm pipe and
connect the adaptor to the chamber via a 110mm
push fit coupler.
16
Delta Dual V4/V6
For technical support, please call 01279 757400
13
