Delta DPM-C530A Скачать руководство пользователя страница 18 | Manualshive

Страница: 18 / 84

background image

17

(3) Select 3. Communication and press the Enter key to enter into options.
(4) Select Address and press the Enter key to start setting up for the address.
(5) When the option is highlighted, start setting up by using the Up and Down keys to select the

numbers needed.

(6)

Press the Enter key to finish setting up for a number and move on to set up for the next number.

(7)

Repeat steps (5)~(6) until finishing setup for the last number and press the Enter key. When the

highlight disappears, setup is complete. If there is a need to cancel the setup in the middle, press
the Menu key to return without saving the numbers that were just set.

(8) Select Protocol and press the Enter key to start setting up for communication mode.
(9) When the option is highlighted, start setting up by using the Up and Down keys to select the mode

needed, such as RTU or ASCII.

(10) Press the Enter key to complete. When the highlight disappears, setup is complete. If there is a

need to cancel the setup in the middle, press the Menu key to return without saving the mode that
was just selected.

(11) Setup for Baud rate, data bit, parity, and stop bit all follow the steps mentioned above.

(12) After completing or cancelling the setup, press the Menu key again to return to the setup menu.

6.3.3 Settings for Potential and Current Transformers

■

Primary-side current transformer (CT1): Ampere for the primary-side current transformer, with a
selectable range of 1~9999 A (factory default: 1 A).

■

Secondary-side current transformer (CT2): Ampere for the secondary-side current transformer, with a
selection of 1 and 5 A (factory default: 1 A).

■

Primary-side potential transformer (PT1): Voltage for the primary-side potential transformer, with a
selectable range of 1~9999 V (factory default: 1 V).

■

Secondary-side potential transformer (PT2): Voltage for the secondary-side potential transformer, with
a selectable range of 1~9999 V (factory default: 1 V).

■

Steps to set up are as follows:

(1) Press Menu key until the menu appears.
(2) Select 0. Setup and press Enter key to enter into the setup menu.
(3) Select 4. Transformer Ratio and press the Enter key to enter into options.
(4) Select CT1 and press the Enter key to start setting up for current transformer on the primary side.
(5) When the option is highlighted, start setting up by using the Up and Down keys to select the

numbers needed.

(6)

Press the Enter key to finish setting up for a number and move on to set up for the next number.

(7)

Repeat steps (5)~(6) until finishing setup for the last number and press the Enter key. When the

highlight disappears, setup is complete. If there is a need to cancel the setup in the middle, press
the Menu key to return without saving the numbers that were just set.

«
...
16
17
18
19
20
...
»

Содержание DPM-C530A





















































































Отзывы:

Нет отзывов

Похожие инструкции для DPM-C530A

Бренд: Macnaught Страницы: 4

Бренд: Idexx Страницы: 6

Бренд: IDEAL INDUSTRIES Страницы: 10

Бренд: M-system Страницы: 5

Бренд: Landis+Gyr Страницы: 26

Бренд: Landis+Gyr Страницы: 3

Бренд: M-system Страницы: 16

Бренд: M-system Страницы: 25

Бренд: WATERGUARD Страницы: 2

Бренд: KBR Страницы: 12

Бренд: SKF Страницы: 12

Бренд: Laserworld Страницы: 5

Бренд: XS Instruments Страницы: 41

Бренд: Kinesys Страницы: 10

Бренд: REED Страницы: 20

Бренд: Oakton Страницы: 26

BAE LX-XO-PL018-L S4 Series

Бренд: Balluff Страницы: 2

Бренд: Tohnichi Страницы: 12

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды