Delta DPM-C510, Руководство по эксплуатации

Страница: 19 / 46

Multi-functional Power Meter DPM-C510 Operation Manual
3-4
_3 _3
3.2 Basic Checks
Items Contents
General Check

Regularly check for mounting looseness where the power meter and device are
connected.

Prevent foreign objects, such as oil, water, or metal powder entering the device through
the ventilation holes. Prevent drill shavings or other debris entering the power meter.

If the power meter is installed at a location with harmful gas or dust, prevent those
materials from entering the power meter.
Pre-operation
Check
(not supplied
with power)

Insulate the connections at the wiring terminals.

Communications wiring should be done properly to prevent abnormal operations.

Check for the presence of conducive and flammable objects, such as screws or metal
pieces in the power meter.

If electronic devices near to the power meter experience electromagnetic interference,
take steps to reduce the electromagnetic interference.

Check for the correct voltage level for the power supplied to the power meter.
Pre-running
Check
(supplied with
power)

Check if the power indicator light is lit.

Check if communication between every device is normal.

If there is any abnormal response from the power meter, contact your distributor or our
customer service center.
3.3 Wiring
3.3.1 Wiring Diagrams

To avoid electric shock, do not change the wiring when the power is on.

It is necessary to install a breaker switch on the power cord of the meter due to no power switch on the
power meter.

When the measured voltage is higher than the rated specification for the device, it is necessary to use an
external potential transformer (PT).

When the measured current is higher than the rated specification for the device, it is necessary to use an
external current transformer (CT).
The following table shows the recommended wiring materials.
Connecting Terminals Wire Diameters Screw Turning Torque Temperature rating
Operating Power /
Voltage Measurement
AWG 10–22 8.0 kgf-cm (0.8 N·m) above 70°C
Current Measurement /
RS-485
AWG 12–24 8.0 kgf-cm (0.8 N·m) above 70°C