Delta DelREMO-V2.0, Руководство пользователя

Страница: 39 / 45

•
39
5 Introducing alarm system and Troubleshooting
After successful commissioning of the DelREMO-V2.0 SYSTEM let us get introduced to the general
faults and problems which operator can encounter during operation of DelREMO-V2.0 SYSTEM. There
are no operator serviceable parts inside the DelREMO-V2.0 SYSTEM and operator is recommended to
contact customer care services for all service related problems. Troubleshooting section provides help for
general operation related problems.
5.1 System Alarms
DelREMO-V2.0 SYSTEM is a fully automatic system and it has self-diagnostic mechanism. DelREMO-
V2.0 SYSTEM is provided with general protections for internal components and assembly. General
protections are provided by means of system alarms. System alerts for error causing situations through
alarms. These faults will be transmitted to Network Operation Centre (NOC) or can be viewed PUSHPAK
II webpage.
5.2 Troubleshooting
The troubleshooting chart is for preliminary diagnosis purposes only. Kindly contact customer support
department before replacement of faulty parts or for more information during troubleshooting.
This section covers faults which may possibly occur during operation. Before any troubleshooting, check
parameter settings and relative values.
5.2.1 Standard procedure
Troubleshooting is always initiated by any alarm. Alarms may be monitored remotely or locally.
Use the following procedure to identify and solve problems in System.
.
•
Check the operation of all LEDs in the system.
•
Check the DelREMO-V2.0 web interface home page for active alarms/status of system.
•
Handle the problem according to the event type or alarm-specific instructions.
5.2.2 System status indications
DelREMO-V2.0 provides system status indicators through both the LED and web user interfaces.
The LEDs on the front panel of the DelREMO-V2.0 are used to give an initial indication of the severity or
type of fault. The normal assignments of the LEDs are shown in table.
Table 5.1 System status indications
LED COLUR LED DESCRIPTION NORMAL WORKING
RED South Bound Devices Stable
GREEN System Blinking at 1Hz.
YELLOW Server Stable
BLUE GSM Stable