1.
DANGER: DO NOT USE THIS UNIT TO FILTER METAL DUST.
Combining wood and metal dust can create
an explosion or fire hazard. This unit is intended to filter non-explosive atmospheres only.
2.
WARNING: DUST GENERATED BY CERTAIN WOODS AND WOOD PRODUCTS CAN BE HAZARDOUS
TO YOUR HEALTH.
3.
WARNING: DO NOT USE THIS UNIT TO DISSIPATE FUMES OR SMOKE
.
This air cleaner is intended for use
where only dry airborne dust is present. Its use should be limited to non-explosive, non-metallic atmospheres.
4
. DO NOT OPERATE THIS UNIT UNTIL IT IS COMPLETELY ASSEMBLED AND INSTALLED ACCORDING TO
THE INSTRUCTIONS
.
5.
OBTAIN ADVICE FROM YOUR SUPERVISOR, INSTRUCTOR, OR ANOTHER QUALIFIED PERSON
if you are
not thoroughly familiar with the operation of this unit.
6.
FOLLOW ALL WIRING CODES
and recommended electrical connections.
7.
DO NOT LIFT THIS UNIT BY THE POWER CORD.
Do not use the power cord as a hanging device.
8.
SECURELY ANCHOR THIS UNIT INTO A SUPPORTING STRUCTURE
when suspending it from the ceiling.
Always keep a minimum of 7 feet between the bottom of the unit and the floor surface to allow for sufficient head
clearance. Use only chain rated for a minimum of 150 lb. working load to adequately hold the unit. Use steel S-
Hooks that are at least 1/4" in diameter to suspend the unit from the ceiling. Lag-type bolts used to suspend the
unit from the ceiling must be threaded at least 1-1/2" into supporting structural members.
9.
SUPPORT THIS UNIT OR SECURELY CLAMP IT TO THE WORK SURFACE WHEN IT IS USED IN A PORTABLE
APPLICATION
to eliminate potential movement and/or damage from falling.
10.
INSURE THAT THE INTAKE AND EXHAUST AREAS ARE CLEAR PRIOR TO STARTING THE UNIT.
11.
KEEP ARMS, HANDS, AND FINGERS AWAY FROM THE FAN.
Avoid all exposure to rotating parts.
12.
DO NOT OPERATE THIS UNIT WITHOUT THE FILTERS IN PLACE.
13.
DO NOT ATTEMPT TO REMOVE OR REPLACE THE FILTER(S) WHILE THE UNIT IS RUNNING.
Make certain
that the unit is disconnected from the power source.
14.
MAINTAIN THE UNIT IN TOP CONDITION
. Keep filters clean for optimum performance. Follow all instructions for
changing and cleaning filters.
15.
STORE THIS UNIT IN A LOCATION
that eliminates the potential of damage to the power cord. Safely store power
cord on the unit to eliminate tripping hazards.
16
. TURN THE UNIT “OFF” AND DISCONNECT IT FROM THE POWER SOURCE
before installing or removing
accessories, or when making repairs.
3
SAFETY RULES FOR
AIR CLEANERS
READ AND SAVE THESE INSTRUCTIONS
.
Refer to them often
and use them to instruct others
.
