background image

3

ADDITIONAL SAFETY RULES FOR

DUST COLLECTORS

WARNING: FAILURE TO FOLLOW THESE RULES MAY RESULT IN SERIOUS PERSONAL INJURY.

1.

DO NOT OPERATE THIS MACHINE 

until it is

assembled

and 

installed

according to the instructions.

2.

OBTAIN ADVICE FROM YOUR SUPERVISOR,

instructor, or another qualified person

if you are not

familiar with the operation of this machine.

3.

FOLLOW ALL WIRING CODES

and recommended

electrical connections.

4.

DO NOT

leave the dust collector plugged into the

electrical outlet. Unplug dust collector from the outlet
when not in use and before servicing, changing bags,
unclogging and cleaning.

5.

ALWAYS

turn all controls “OFF” before unplugging

the dust collector.

6.

TO REDUCE THE RISK OF ELECTRICAL SHOCK

,

do not use on wet surfaces. Do not expose to rain. Store
indoors.

7.

DO NOT

use the dust collector to pick up

flammable or combustible liquids, such as gasoline.

NEVER

use the dust collector near any flammable or

combustible liquids.

8.

USE

the dust collector to pick up wood materials

only. 

DO NOT

use the dust collector to pick up metal

shavings, metal dust, or metal parts.

9.

NEVER 

use the dust collector to dissipate fumes

or smoke.

NEVER

pick up anything that is burning or

smoking, such as cigarettes, matches or hot ashes.

10.

DO NOT

pull the dust collector by the power cord.

NEVER 

allow the power cord to come in contact with

sharp edges, hot surfaces, oil or grease. Do not place
anything over the top of the power cord.

11.

DO NOT

unplug the dust collector by pulling on the

power cord. 

ALWAYS

grasp the plug, not the cord.

12.

DO NOT

handle the plug or dust collector with wet

hands.

13.

REPLACE

a damaged cord immediately.

DO NOT

use a damaged cord or plug. If the dust collector is not
operating properly, or has been damaged, left outdoors
or has been in contact with water, take it to an
Authorized Service Center for service.

14.

DO NOT

use the dust collector as a toy. 

DO NOT

use near or around children.

15.

DO NOT

insert fingers or foreign objects into the

dust intake port or discharge port. Keep hair, loose
clothing, fingers, and all body parts away from openings
and moving parts of the dust collector.

16.

DO NOT

use with any opening blocked; keep

openings free of dust, lint, hair, and anything that may
reduce air flow.

17.

NEVER

use the dust collector without the dust

collection bag in place and properly secured.

18.

ALWAYS

use intake cover to cover dust port when

the dust collector is not in use or mounted to a
supporting surface for storage.

19.

PERIODICALLY INSPECT 

dust bag for any cuts,

rips or tears.

NEVER 

operate the dust collector with a

damaged bag or vacuum hose.

20.

USE EXTRA CARE

when cleaning on stairs.

21.

TURN THE MACHINE “OFF” AND DISCONNECT

THE MACHINE

from the power source before installing

or removing accessories, before adjusting or changing
set-ups, or when making repairs.

22.

TURN THE MACHINE “OFF”,

disconnect the

machine from the power source, and clean the
table/work area before leaving the machine. LOCK THE
SWITCH IN THE “OFF” POSITION

to prevent

unauthorized use.

23.

ADDITIONAL INFORMATION 

regarding the safe

and proper operation of this tool is available from the
Power Tool Institute, 1300 Summer Avenue, Cleveland,
OH 44115-2851. Information is also available from the
National Safety Council, 1121 Spring Lake Drive, Itasca,
IL 60143-3201. Please refer to the American National
Standards Institute ANSI 01.1 Safety Requirements for
Woodworking Machines and the U.S. Department of
Labor OSHA 1910.213 Regulations.

SAVE THESE INSTRUCTIONS. 

Refer to them often 

and use them to instruct others. 

Содержание 3 H.P. SINGLE-STAGE DUST COLLECTOR 50-852

















Отзывы: