17
Cancel button to activate this function.
The activated SAVE function can be deactivated by firstly pressing the “Function” button to
select the “SAVE” option and then pressing the “Enter/Cancel” button.
The energy saving setting is as shown in the Fig.20:
Unit On, no Save function
Press “Function” button to set
energy-saving temperature for
Cooling
adjust temperature
Press "Mode" button to set
energy-saving temperature
for Heating.
adjust temperature
Press “Enter/Cancel” button to
activate save function
Fig.20 SAVE Function Setting
Notes:
① .
Under the Auto mode, when the “SAVE” function is activated, the unit will forcibly quit the
Auto mode and change to the current operation mode. Further, the “Sleep” function will be
deactivated when the “SAVE” function is activated.
② .
During the “SAVE” setting, if the Function button is pressed down or there is not any
operation within 5s after the last button operation, the system will quit the “SAVE” setting
with the current setting data not saved.
③ .
The “SAVE” function setting will be memorized in case of power failure.
④ .
The lower limit for cooling is 16 °C and the upper limit for heating is 30°C.
⑤ .
During the “SAVE” setting, if the expected setting temperature is out of the limit, then the
limit temperature always prevail.
