Delta 21CK018C24, Инструкция по эксплуатации

Страница: 13 / 64

12
will be switched to timer on setting mode. In this case, LCD displays
xx. Hour,
with
ON
blinking.
In this case, press ▲ or ▼ button to adjust timer on and then press
Timer
button to confirm. When
LCD displays
xx. Hour On Off, xx. Hour
means time of timer off, but time of timer on won’t be
displayed.
Cancel timer: After setting of timer, if
Timer
button is pressed, LCD won’t display
xx. Hour
so that timer setting
is canceled.
Timer off setting under
on-state
of the unit is shown as Fig.3.4.6
Fig. 3.4.6 Timer setting under on state of the unit
Timer range: 0.5-24hr. Every press of
▲ or ▼ button will make setting time increased or decreased by 0.5hr.If press
either of them continuously, setting time will automatically increase/ decrease by 0.5hr every 0.5s.
Note:
1. If both timer on and timer off are set in unit on interface, the wired controller only display time of time off. If both
of them are set in unit off-state, only time of timer on is displayed.
2. Timer on in unit on-state is timed from the time of unit off and timer off in unit off-state is timed from the time of
unit on.