Delta Tau Turbo PMAC PCI-Lite, Справочник по аппаратуре

Страница: 36 / 56

Turbo PMAC PCI Lite
28 E-Point Jumper Descriptions
E-POINT JUMPER DESCRIPTIONS
E0: Reserved for Future Use
E Point and
Physical Layout
Location Description Default
E0 A6 For future use. No jumper
E1 - E2: Machine Output Supply Voltage Configure
E Point and
Physical Layout
Location Description Default
E1 A6 Jump pin 1 to 2 to apply +V (+5V to 24V) to pin
10 of U13 (should be ULN2803A for sink output
configuration) JOPTO Machine outputs M01-
M08.
Jump pin 2 to 3 to apply GND to pin 10 of U13
(should be UDN2981A for source output
configuration).
Caution:
The jumper setting must match the type of driver
IC, or damage to the IC will result.
1-2 Jumper installed
E2 A6 Jump pin 1 to 2 to apply GND to pin 10 of U13
(should be ULN2803A for sink output
configuration).
Jump pin 2 to 3 to apply +V (+5V to 24V) to pin
10 of U13 (should be UDN2981A for source
output configuration).
Caution:
The jumper setting must match the type of driver
IC, or damage to the IC will result.
1-2 Jumper installed