Sensor Wiring
© 2007 Delta-T Devices Ltd
Service & Recali
Before returning parts please co
bration
ntact Delta-T or your local agent for instructions.
aceable in the field.
Note: the Windvane, though connected to
GP1 terminal Temp3, is actually read as a
voltage output sensor (0-2.5V equals 0-360
degrees). The internal circuit differs from the
standard MetOne O34B, see panel at right.
See also
D-034B-CA Technical Manual
on the Delta-T Software and Manuals CD.
Wind speed and direction D-034B-CA
Recalibrate
: every year.
Service
: 6-12
months: look & listen to see if the vane and
cups are running freely, are undamaged, and
are not loose. 12-24 months: replace
anemometer bearings. 24-36 months:
complete factory overhaul of sensor.
Most parts are repl
10K
10K
5V (ref)
GND
Temp3 (IN)
Temp3 (GND)
green
yellow
Windvane circuit schematic
white
1M
1K
Colour
Function
GP1 connection
Black
WS common
GND
Pin 4
Green
WD Common
Temp3 (GND)
White
WD +REF
+5V (ref)
White/brown
Shield
GND
RH Signal -
CH2 (-)
Blue
Air temp +
Temp4 (IN)
Yellow
Air Temp -
Temp4 (GND)
Red
Power V+
CH2 (PWR)
Black Power
V-
CH2
(GND)
Screen
Shield
GND
either
Switch NO
Event 6
either
Switch common
GND
ion
Red
Signal
CH1 (+)
Black
5V power
+5V (ref)
Clear
Ground
CH1 (GND) + CH1(-)
Rain
and direction
A
ranometer
nl-CA
rature
Wind speed & Direction:
Pin 1
Red
WS signal
Event 5
Pin 2
Pin 3
Yellow
WD signal
Temp3 (IN)
D-O34B-CA
Wind speed
Pin 5
Temperature & RH
White
RH
CH2 (+)
Green
RHT3
Tempe
Rainfall
Solar Radiat
RG2
D-PYRPA-C
py
and RH
Page
11