8
Congratulations!
You have chosen to purchase a high-quality
product. Familiarise yourself with the product
before using it for the first time.
Read the following operating
instructions carefully.
Use the product only as described and only
for the given areas of application. Store these
operating instructions carefully. When passing
the product on to third parties, please also hand
over all accompanying documents.
Scope of delivery (figure A)
1 x mobility trainer with resistance screw and
display (including battery
(1 x 1,5V
LR44))
1 x operating instruction
Technical data
Dimensions: approx. 48 x 30 x 37cm (W x H x D)
Weight: approx. 2.4kg
Material: plastic, steel
Max. user weight: 100kg
Equipment class: HC (for use in private house-
holds, precision C) / not suitable for therapeutic
training;
Non-speed dependent exercise equipment.
WARNING!
This stationary piece of training
equipment is not suitable for purposes that
require a high level of accuracy.
Symbol for DC voltage
Date of manufacture (month/year):
02/2021
Delta-Sport Handelskontor GmbH here-
by declares that this product complies
with the following basic requirements as
well as other relevant statutory provisions:
2014/30/EU – EMC Directive
2011/65/EU – RoHS Directive
Correct use
The article is not designed for commercial use.
The product is designed for use in the private
sphere. This article enables you to train your
arms and legs; fitted with a resistance screw
in order to increase and maintain mobility. An
integrated display shows training advances.
Folding legs allow you to store the mobility
trainer and assemble it again.
Safety notes
Important: read through
these operating instructions
carefully and always retain
them for future reference.
• The article is not suitable for
therapeutic purposes.
• During the exercises sit upright
and relaxed with a straight
back.
• Exchange defective parts of the
article immediately and do not
use the article until the repair is
complete.
• Please note that incorrect or
excessive training may be
detri-mental to health.
• Place the article on a horizon-
tal, level surface.
• Use an anti-slip underlay on
smooth surfaces.
• Observe wear on parts. If the
article no longer offers any
step resistance then the drive
belt is worn and the article
needs tobe replaced.
GB/IE/NI
Содержание 353226 2007
Страница 2: ...A B C D E ...
Страница 3: ...5 H I F G ...