DRFF-530R Screw Feeder
Operation and Setup Manual
www.deltaregis.com
17
Maintenance
Before maintaining the machine, turn off power and disconnect the power.
Brush cleaning & maintenance:
Wipe the front end of the bristles with a dry, lint free cloth or compressed air to
remove dirt and debris. Sweep the brush manually to ensure it makes contact
with the screw heads, adjust brush as needed. Brushes worn to the point they
cannot make contact with the screw heads, replace immediately.
Rail cleaning & maintenance:
Using a lint free swab dipped in alcohol, clean the inner rail surfaces, clean the
rail’s sliding surface very well as to remove any debris or oil.
Cleaning and maintaining the machine:
Remove the side covers and check for foreign screws and/or debris that
may have fallen inside the machine. Use compressed air to remove any
accumulated dust. Check all accessible fasteners to ensure they are tight
before reinstalling the covers.
Parts and Accessories
If you require parts or accessories for your Delta Regis product, please refer to
our website or contact us for further information. Use only genuine Delta Regis
parts when servicing these products.
