Delta OHM HD40.1, Руководство пользователя, Страница: 20 / 28

- - 20
•
The paper roll advances and the Baud Rate parameter will appear.
•
This parameter does not affect the Bluetooth interface. Press the ON/OFF
key to confirm the value printed.
•
The roll paper advances and the Automatic switch-off delay parameter will appear.
• Press the MENU key to select the required value (the factory parameter is 5 min-
utes,
0 disables automatic switch-off ). Press the ON/OFF key to confirm.
• The roll paper advances and the Printing density parameter will appear.
•
Press the MENU key to select the desired value (the factory parameter is 0). Press
the ON/OFF key to confirm.
•
The printer exits the configuration menu and it is ready to print.
The printer configuration is stored until you change it.
C) How to configure the instrument
• Turn on the printer configured as shown above.
• Turn on the instrument and select System Parameters >> Bluetooth Parameters in
menu.
•
Select Bluetooth Connection to the printer : the instrument searches for all active
Bluetooth devices and it displays the first four devices.
•
Use the UP and DOWN arrow keys to select the printer you want to connect to and
press ENTER to confirm. The instrument configures itself for connection and it goes
back to the measurement mode.
Now you have completed the configuration and the instrument is ready to
use.
Settings are stored: when you turn on the instrument, it connects itself to your printer
directly.
Set the printing interval on the instrument too .
D) How to connect the instrument to the printer
You can use the HD40.2 printer (configured correctly, as shown in paragraphs B and
C) as a normal printer connected to the instrument through a cable. Instrument and
printer settings are stored until you change them.
Please follow the steps below:
•
Turn on the HD40.2 printer with Bluetooth configuration.
•
Turn on the instrument with HD22BT Bluetooth module configured.
• The instrument searches for the printer and it connects itself.
Now the printer and the instrument are ready and configured correctly.