Delta OHM HD3409.2, Руководство пользователя

Страница: 20 / 40

- -
20
The following table reports the indications provided by the instrument as they appear on the display,
together with their description.
Display indication Explanation
AUTO HOLD
automatic function holding the displayed measurement
BATT TOO LOW - CHNG NOW
battery discharged - replace it immediately
BAUDRATE
baud rate value
CHNG MEMBRANE AND ELECTROLYTE
replace the electrolyte solution and/or membrane
COMM STOP
printing complete
COMM STRT
printing started
DAY_
day
DUMP_END
data transfer complete
DUMP_IN_PROG
data transfer in progress
FUNC CLR
max, min and average values clearing
FUNC CLRD
max, min and average values cleared
HOUR
hour
LAST CAL m/d h/m
last calibration date month/day hour/minutes
LOG IN PROG
logging in progress
LOG MEM FULL
memory full
LOG_CLRD
memory data cleared
LOG_DUMP_OR_ERAS
transfer or erase data
LOG_STOP
logging complete
LOG_STRT
logging started
mg/l
concentration of dissolved Oxygen unit of measurement
MIN >>> USE_UNIT_TO_ZERO SEC
minutes >>> use the UNIT key to reset the seconds
MNTH
month
NaCl
measurement of salinity in g/l
PLS_EXIT >>> FUNC RES_FOR_FACT ONLY
please exit using ESC >>> function reserved to factory calibra-
tion
PRBE_TYPE type of probe connected
PRNT AND LOG INTV printing and logging intervals
PRNT INTV printing interval
PROB COMM LOST lost communication with probe
RCD MODE record function operating mode (max, min, avg)
REF_TEMP reference temperature
SAL mg/l UNT=RSET setting the salinity (°C/°F key to reset)
SAT % the display is showing the saturation index
SLOP slope or gain of the dissolved Oxygen probe
SLP_MODE_LOG turning off during recording mode
SMPL ID UNT=RSET SER=PRINT identifier of the sample - °C/°F=reset - SERIAL=print heading
SYS ERR # program error number #
UNDR minimum limit exceeded
YEAR year