Delta OHM HD2817T Series, Руководство пользователя

Страница: 33 / 64

33
13. The value near Scale high value will blink: use the
 
arrows to set the value 100.0 and
confirm with ENTER.
14. Press ESC twice; you will return to the menu “ Output Analog 1-2-3 ”.
15. To set the A2 output, use the
 
arrows to select “ Out Analog 2 ” and press ENTER.
16. Use the
 
arrows to select the “ Mode” line and press ENTER: the Out 2 - Mode menu
will open.
17. Use the
 
arrows to select the “ T Temperature ” item and press ENTER. An asterisk will
appear near the selected item. Press ESC to return to the previous menu.
18. Use the
 
arrows to select the Range values line and press ENTER: the “ Out 2 -
Temperature Range ” menu will open.
19. The value near Scale low value will blink: use the
 
arrows to set the value 0.0 and
confirm with ENTER.
20. The value near Scale high value will blink: use the
 
arrows to set the value 150.0 and
confirm with ENTER.
21. Press ESC twice; you will return to the menu “ Output Analog 1-2-3 ”.
22. To set the A3 output, use the
 
arrows to select “ Out Analog 3 ” and press ENTER.
23. Use the
 
arrows to select the “ Mode” line and press ENTER: the Out 3 - Mode menu
will open.
24. Use the
 
arrows to select the “ Td Dew Point ” item and press ENTER. An asterisk will
appear near the selected item. Press ESC to return to the previous menu.
25. Use the
 
arrows to select the Range values line and press ENTER: the “ Out 3 - Td
Range ” menu will open.
26. The value near Scale low value will blink: use the
 
arrows to set the value -20.0 and
confirm with ENTER.
27. The value near Scale high value will blink: use the
 
arrows to set the value 80.0 and
confirm with ENTER.
28. Press MENU to exit the menu and return to measurement mode.
The procedure is complete.