17
The “
TIME/DATE
”
item allows
access to modify the instrument date and time. An internal
circuit fitted with backup battery ensures the correct functioning of the clock even in case of
mains power failure.
Date and time are expressed as year/month/day, hours/minutes/seconds.
Use the
arrows to modify the year, already selected, and press ENTER
to confirm.
You will get to the month setting. Change it using the
arrows and confirm with
ENTER.
Repeat for the other items. The seconds start from 00 when pressing ENTER to confirm
the minutes.
After confirmation of the minutes you will exit the setting page and return to the menu
main screen.
G. CONF.
OUT
(
Output
c
onfiguration
)
OUTPUT CONFIGURATION
Output Relay
Output Analog 1-2-3
<UP> <DOWN> select
<ENTER> confirm
<ESC> exit
The “
Output configuration
”
item is composed of two sub-functions concerning the management
of relays (
Output Relay
) and analog outputs (
Output Analog 1-2-3
). The two following
paragraphs will outline in detail the relay and analog output settings: for a general description
on how to use of analog outputs and relays, please see the chapters “
Instruments fitted with
relay outputs
” and “
Current and voltage analog outputs
”.
G.1 Relay configuration
To set the three relays, select the
CONF. OUT
>>
Output Relay
menu item
.
You will get to the screen with these three relays:
OUTPUT RELAY
Relay RL1
Relay RL2
Relay RL3
<UP> <DOWN> select
<ENTER> confirm
<ESC> exit/cancel
Use the
arrows to select the relay to be configured and confirm with ENTER.
