11 | www.deltaheat.com
BAFFLE FILTER
INSTALLATION, USE AND CARE
INSTALLER:
Please leave these installation instructions with unit for the owner.
1.
Remove all packaging and the productive plastic covering from filters.
2.
Grasp the filter by the center baffle, see FIG 11, with the spring end facing you and the grease
collector channel is facing down and toward the rear of the hood. Position the spring end of the
filter into the upper channel of the front escutcheon, compress the spring by pulling the filter
toward you and rotate the rear of the filter up and into the rear retaining recess formed by the
rear escutcheon and retaining clip. Release the filter, being sure it is positioned properly in the
channels. You should be able to push and pull down on the filter without having it come out of
position. You can bend the spring lightly outward if the filter is no pressing securely against the
rear escutcheon.
3.
The filter has an integral grease collector and is dishwasher safe. To clean your filter simply
grasp the filter by its center baffle, pull toward the front of the hood and rotate the rear of the
filter down and away from the hood, see FIG 12.
4.
For best dishwasher results, position the filters in the dishwasher rack with the baffles positioned
horizontally.
BACKDRAFT DAMPER:
It is recommended that a backdraft damper in all installations. In cold
weather installations it is necessary to use a backdraft damper to minimize backflow of cold air into
the room. A non-metallic thermal break should also be used to minimize conduction of outside tem-
peratures through the ductwork. The thermal break should be located as close as possible to where
the ducting enter the heater portion of the room.
FIG 11
1
2
3
WRONG
GREASE
COLLECTOR
CHANNEL
1. POSITION IN UPPER CHANNEL
2. PULL
3. ROTATE UP AND INTO RETAINING RECESS
FIG 12
1
2
3
1. PULL
2. ROTATE DOWN
3. REMOVE FILTER
